ABB
0102030405
ABB 07DC92 GJR5252200R0101 Digit Input/Output module
Key SpecificationsVOGI
Product Type: ABB OCS series DCS for wind power plant industrial control wind power plant and other scenarios suit; Some information shows that it is a 32-point digital input module for AC 500 series PLC, used to receive sensor or switch signals.
Voltage: 24V DC (must not be 220V AC, some sources are incorrectly marked, model confusion).
Output: 50Hz (ohm)
Data level: active/passive signals, integrates multiple voltage levels (e.g. 24V DC outputs)
Key FeaturesVOGI
1.Possibility of DC contactor
ABB 07DC92 GJR5252200R0101 Contact capacity : medium to high current (16A~100A) DC load control.
Withstand voltage level: ABB 07DC92 GJR5252200R0101, The rated voltage can cover DC 100V~1000V, to meet the industrial or new energy fields.
Coil type: ABB 07DC92 GJR5252200R0101 Low-power coil (24V DC/48V DC) & effect of energy-saving operation.
Arc extinguishing capacity: Has internal arc extinguishing device, suitable for frequent start-stop or high impact current environment.
2. Potential DC circuit breaker
ABB 07DC92 5kA~10kA breaking capacity, therefore, for short-circuit protection.
Pole config: ABB 07DC92 GJR5252200R0101，1P/2P/3P/4P optional ，applicable run in to single-phase or three-phase DC systems
Modular design:ABB 07DC92 allows to quickly replace or add new functions (such as remote control).
3. Environmental adaptability
Wide temperature range (eg -40℃~+70℃), suitable for outdoor or harsh industrial environments.
It has high protection level (for example, IP65), that is, it has good dust and water resistance.
Freight Estimation(Part Of The Area)VOGI
|
Destination |
Freight |
|
Middle East |
$35 |
|
Southeast Asia |
$15 |
|
South Asia |
$45 |
|
South Africa |
$37 |
|
Europe and USA |
$24 |
|
Russia |
$42 |
APPLICATIONVOGI
1. New energy field
Photovoltaic invertors and energy storage systems of log switching or side DC protect.
Electric vehicle charging piles based on DC power management
2. Industrial equipment
It is responsible for DC motor drive control, battery pack charge and discharge management.
Power supply system for heavy equipment such as cranes and rolling mills.
3. Rail transit
Protection system for DC traction power supply system in subway and high-speed railway
Circuit breakers or contactors of on-board battery management systems (BMS).
4. Communication base stations
DC output security of communication power supplies (UPS/battery packs).