ABB
ABB DDI01 P3711-4-0369626 Digital Input Module
Technical ParametersVOGI
Typical voltage range: 24V DC
Number of channel: 16 channel
Logic level range: low level (0-5V), high level (15-30V DC)
Input current: normal value about 3-10mA
Response time: ≤1ms
Working temperature: 25°C~70°C
Protection level: IP20
Anti-crash: 4KV according to IEC 61000 electromagnetic compatibility standard
Power Consumption: typical value ≤5W
Key FeaturesVOGI
High reliability and stability
Industrial level design: ABB DDI01 has undergone a series of industrial environment test (including vibration, high temperature and EMC interference, etc) to guarantee prolonged steady operation.
Channel isolation: ABB DDI013C 1SAP240600R0001 Each signal input channel is isolated separately to eliminate the possibility of signal crosstalk and enhance safety of system operation.
Easy to use with convenient setup and diagnostic capabilities
Status indication: Each channel of ABB 1SVR430810R4500 DDI01 is fitted with a LED indicating the input-signal status (on/off) live for easy fault diagnosis.
Diagnostic alarm: ABB DDI01 supports head-level and channel-level fault alarms (such as disconnection, short circuit, etc.), and the fault information can be reported through the controller.
Compatibility and scalability
Modular construction: ABB DDI01 is easy to use in conjunction with ABB AC 800M series of controllers and can be extended for multi-module systems.
Hot-swap capability: ABB DDI01 realizes the replacement of modules without power-off and guarantees smooth start-ups with minimum down time (support by system).
Ease of installation and maintenance
Small volume: ABB DDI01 can save control case space, and it's fit for the high density mounting.
Spring clamp terminal: Quick wiring, less installation time and less wiring mistake with the ABB DDI01.
Freight Estimation(Part Of The Area)VOGI
|
Destination |
Freight |
|
Middle East |
$35 |
|
Southeast Asia |
$15 |
|
South Asia |
$45 |
|
South Africa |
$37 |
|
Europe and USA |
$24 |
|
Russia |
$42 |
APPLICATIONVOGI
Process Control: DDI01 is equipped with valve status monitoring and the starting and stopping of equipment signal acquisition.
Factory automation: DDI01 read sensor signals on a production line (e.g. position detection, safety door switch) Gain-adjuster function Its gain to be able to make adjustment because function It is 35 to 35 dB in adjustment range.
Energy system: monitoring of the supply cabinet switch status and failure audio alarm DDI01.