ABB SPGU240A1 Power Supply Unit

Current Output: 0-20 mA, 4-20 mA (Configurable separately)

The output voltage: 0-10 V, ±10 V(Each can be configured independently).

Resolution: 12 bits; high accurate signal output

Latest for testing: Load impedance can reach a maximum of 500 Ω (4–20 mA)

Output voltage: Minimum load impedance 1 kΩ (0-10 V).

Linearity: Typical value is ±1 % of full scale.

Ripple suppression: >60 dB (50/60 Hz).

Mounting style: Mountable on DIN rail (compatible with the DIN EN 50022 standard).

Operating temperature: +0°C to +55°C (non-condensing environment).

DOP31452: Storage temperature: -25°C to 70°C

Humidity: 5 to 95 percent relative humidity (non-condensing).

Power supply voltage: 24 V DC (±10%).

Power consumption: 3 W typical (full load on 4 channels).

12-bit precision: High-precision output: 0.1% full scale accuracy, 0-20mA/4-20mA current, 0-10V/±10V voltage output, single-channel independent configuration.

Load adaptability: Now output can drive 500Ω load; Now voltage output can drive 1kΩ load; meet the needs of industrial equipment drive.

2.High reliability design

Function: 500V AC isolation between channels, strong anti-interference ability.

Fault detection: real-time monitoring short circuit/ overload, LED work status indicator, quick find fault.

You'll notice that each stage falls under a category of either Continuous Integration, Continuous Delivery, or Continuous Deployment.

3. Flexible deployment capability

Small in size: The volume is 53×46×94mm, installed on the DIN rail, which saves control cabinet space.

Protocol compatibility: compliant with PROFIBUS DP protocol, the mainstream PLC/DCS systems are seamlessly connected.

4. Wide environmental adaptability

Operating temperature: 0-55℃, storage temperature: -25-70℃, adapt to harsh industrial environments.

Humidity tolerant: Works in 5%-95% humidity environment (non condensing).

5. Easy to Maintain Features

The 24-12 AWG wire screw terminals are removable for quick plug and unplug.

Redundancy support: Dual power supply redundant configuration to ensure that the system continues to work.

Boiler control, turbine speed control, and excitation system in power plants.

Water treatment: control of dosing, filtration and disinfection systems for water quality treatment.

Intelligent buildings: air-conditioning systems, lighting control and energy management.