Allen Bradley 1440-TB-A Terminal Bases
Key SpecificationsVogi
Allen Bradley 1440-TB-A Redundant Power Supply Interval For Allen Bradley Redundant Industrial Monitoring Module Here are its key technical specifications:
1.1 Power Requirements
Input Voltage: 21.6–26.4 VDC
This 4-28V tolerance range offers stable operation in industrial environments with fluctuating power supplies and is compatible with standard 24VDC systems.
Consumption: 175–300 mA
The low power architecture ensures low energy, while still enabling advanced processing.
1.2 Mechanical Specifications
Terminal Screw Torque: 0.8 Nm (7.1 lb-in)
Data only up to October 2023
Installation: Mount on a TS35/7.5/15 compatible DIN Rail
Support fast mounting on control panels and industrial racks by using off-the-shelf hardware.
1.3 Environmental Tolerance
Temp Range: Industrial Temp (-20°C to 65°C)
Rated for stationary, continuous operation in hostile factory environments.
-40°C to 85°C Wide Operating Range
Permits short-lived conditions with harsh environments during system turn-ons or failures
Humidity: ≤95% RH (non-condensing)
Note: It also conforms to IEC 60068-2-30 for moisture resistance.
Freight Estimation(Part Of The Area)Vogi
|
Destination |
Freight |
|
Middle East |
$35 |
|
Southeast Asia |
$15 |
|
South Asia |
$45 |
|
South Africa |
$37 |
|
Europe and USA |
$24 |
|
Russia |
$42 |
FeaturesVogi
2.1 Multi-Sensor Integration
The following are proofs of this versatility regarding Allen Bradley 1440-TB-A:
Universal Sensing Inputs:
At the same time processing dynamic signals from:
Eddy Current Probes (for monitoring of displacement)
IEPE Accelerometers (for vibration analysis)
DC/AC Voltage Sensing (0–10V/±5V ranges)
Velocity transducers (low frequency monitoring)
Tachometer Compatibility:
Supports Hall effect, optical encoder, and magnetic pickup (1–20,000 PPR) signals for RPM measurement.
2.2 Architecture of Signal Processing
30-Channel Pipeline Parallel Processing:
Calculates in real time:
Velocity to displacement conversion (dual integration)
FFT spectral analysis (currently up to 10 kHz FF bandwidth)
Detection of Peak/Peak-Peak Value
Onboard Intelligence:
Unofficial alarm limits can be set on:
Vibration severity levels according to ISO 10816
Custom process limit triggers
Monitoring of bearing defect frequencies
2.3 Output Configuration
2× 4–20mA channels with: analog outputs
16-bit resolution
99.5% over its operational life span.