Allen Bradley 1771-IFE ANALOG INPUT MODULE
Key SpecificationsVogi
Analog output: 2 channels 12 bit PWM/analog voltage output (0-10V DC or 4-20mA)
Responsetime: ≤1ms (usually value)
Protocol: EtherNet/IP, Profinet RT (additional adapterrequired), Modbus TCP
Port: 1 RJ45 Ethernet port (10/100Mbps adaptive)
Power supply: 24V DC (±10%)
LEDstate: green (OK), red (ERR), yellow (COMM)
Isolation protection: Input/output/power triple electrical isolation (withstand voltage2500V AC/DC)
Temperature to be used: -40 °C~ 70 °C
Standards of protection: IP67 (for dust and water)
Freight Estimation(Part Of The Area)Vogi
|
Destination |
Freight |
|
Middle East |
$35 |
|
Southeast Asia |
$15 |
|
South Asia |
$45 |
|
South Africa |
$37 |
|
Europe and USA |
$24 |
|
Russia |
$42 |
FeaturesVogi
1. Signal Conditioning: The signal will be fed into the AllenBradley 1771-IFE to condition the current input signal. This conditioning provides noisefiltering and elimination of interference so that it gives clean and true data for further algorithm processing. Such signals contain very few jumps and inaccuracies thatmay result in improper control decisions and disturb industrial work.
2. Data Conversion: This input is converted from an analog currentto digital information understood by other devices in the industrial control system, like programmable logic controllers. This digitisation enables the present module to get affiliated with contemporary automation frameworks and avail superior data processing and analyticscapability.
You are able toscale or calibrate the input signal of the input module. The concept of Units indicates that the raw current value may be processed and calibrated to report amore physical reading in terms of temperature, pressure, flow, etc. As an instance, if a certain sensor is generating a current output based on rising temperature, that Allen Bradley 1771-IFE needs to be programmedto translate the current value to an applicable temperature reading in the suitable measurement, like degrees Celsius (°C), or degrees Fahrenheit (°F).
3. Integrated fault detection: Fault detection and indication It is capable of detectingabnormal-input-conditions like overcurrent or open circuit. After detection of a fault, the module communicates with the associated control system to relay the detection result inthe form of a dedicated fault output signal or fault status. This provides a method for rapidly identifying and resolving issues, as well as being a fantastic means of preventing downtime andensuring system reliability.
applicationsVogi
1. Process control: In the chemical industry, monitor the reactor temperature, pressure, and flow; monitor pipeline parameters in oil and gas production to ensure safeand stable production.
2. Manufacturing: Monitoring cutting force and otherdata, adjust parameters in the metal processing; Equipment & environment monitor for the purpose of product quality improvement of electronic manufacturing.
3. Energy management: system status monitoring for power system; monitoring power generation equipment parameters in renewable energy to improveelectricity generation efficiency.
4. Building automation: environmental data collectionin HVAC system for adjustment of equipment; dimming according to light intensity in lighting system to save energy and increase efficiency.