Bently Nevada
0102030405
Bently Nevada 21504-000-040-05-02 Standard Mount Probe
Key SpecificationsVOGI
Measurement Range: T0–2 mm (80 mils) peak-to-peak displacement.
Frequency Response: 0–10 kHz (±3 dB).
Sensitivity: 8 mV/µm (200 mV/mil).
Operating Temperature:
Probe: -40°C to +150°C.
Extension Cable: -40°C to +120°C.
Power Supply: 24 VDC.
Key FeaturesVOGI
Accurate fault diagnosis: Bently Nevada 21504-000-040-05-02 can detect various fault hazards of the equipment in time and accurately during its operation, such as imbalance, misalignment, looseness, bearing wear, etc. through in-depth analysis and processing of the collected vibration signals.
Output of multiple signal types: The output of multiple signal types can be proportioned to the measured vibration parameters, which is convenient for connection and integration with other equipment or systems.
Wide range signal processing: Bently Nevada 21504-000-040-05-02 has great signal processing capability, able to adapt to many different kinds of vibration signal input. Its useful input range is wide, for displacement measurement signal, the useful input range may cover from 0 to 250 mils peak-to-peak; for acceleration measurement signal, the range may cover from 0 to 10g; in the frequency response, it can cover from DC (0Hz) to 1000 Hertz several thousand Hertz (for example 10kHz or higher), to ensure that different frequency components of the vibration signal can be analyzed.
Freight Estimation(Part Of The Area)VOGI
|
Destination |
Freight |
|
Middle East |
$51 |
|
Southeast Asia |
$15 |
|
South Asia |
$67 |
|
South Africa |
$53 |
|
Europe and USA |
$27 |
|
Russia |
$60 |
APPLICATIONVOGI
Centrifugal compressers and gas turbines: Bently Nevada 21504-000-040-05-02 can monitor rotor vibration and axial displacement to prevent unplanned downtime relating to surge or seal failure.
Offshore drilling platforms: Preventively monitor key pump units in humid or salt spray conditions for long-term and stable operation.
Compressor units: Diagnose bearing wear and rotor misalignment to optimize maintenance cycles and energy efficiency.
Rolling mills and gearboxes: Bently Nevada 21504-000-040-05-02 monitors transmission system vibration to reduce production interruptions caused by abnormal gear meshing.
Steam turbines and generators: Track shaft thermal expansion and vibration to avoid the risk of critical speed resonance.
Propulsion shafting and steering gear: Detect propeller shaft vibration and alignment status to improve navigation safety and energy efficiency.
Nuclear power plant main circulation pump: Bently Nevada 21504-000-040-05-02 ensures the accuracy and stability of displacement monitoring under high temperature and high pressure conditions.
Large motors and fans: Track bearing seat vibration to optimize lubrication management and load distribution.