Bently Nevada
0102030405
Bently Nevada 9200-06-05-05-00 Two-wire Transducer
Key SpecificationsVOGI
Output: 4-20mA linear to vibration level
Frequency Range: 10 Hz to 1 kHz.
Power Supply: 18-30V DC.
Measurement Range: Configurable.
Accuracy: ±1% full scale.
Operating Temperature: -40°C to +85°C.
Housing: Robust metal enclosure (IP67/NEMA 4X).
Certifications: ATEX/IECEx.
Mounting: DIN rail or panel mount.
Key FeaturesVOGI
Reliable fault diagnosis function: Bently Nevada 9200-06-05-05-00 can effectively detect abnormal conditions during equipment operation by monitoring and analyzing equipment parameters such as vibration and displacement for a long time, like imbalance, misalignment, looseness and other potential faults. Once an abnormality is discovered, an early warning signal can be released to alert the operators of timely actions to maintain and repair in order to prevent the equipment from failure and reduce the equipment downtime and maintenance costs.
High-quality signal transmission and processing: The matching extension cable has good impedance characteristics, can ensure the stability and accuracy of the signal in the transmission process, and reduce signal attenuation and interference. Its drive unit is capable of processing and converting the signals that the sensor collects and outputs standard voltage signals (such as -20V to 0V, etc.), making it more convenient for connecting the data interaction of the follow-up monitoring system or controller.
High-precision displacement and vibration measurement: Bently Nevada 9200-06-05-05-00 can achieve high-precision displacement and vibration measurement.
Freight Estimation(Part Of The Area)VOGI
|
Destination |
Freight |
|
Middle East |
$34 |
|
Southeast Asia |
$15 |
|
South Asia |
$44 |
|
South Africa |
$36 |
|
Europe and USA |
$27 |
|
Russia |
$41 |
APPLICATIONVOGI
Gas turbine protection: Detect bearing vibration and shaft center trajectory to avoid downtime due to misalignment or poor lubrication.
Steam turbines and generators: Bently Nevada 9200-06-05-05-00 can monitor shaft vibration, eccentricity and thermal expansion to ensure safe operation of the power plant.
Wind turbines: Integrated into gearbox and main bearing monitoring system to warn of early wear or fatigue cracks.
Reactor mixers: Monitor mechanical seal vibration to prevent leaks and process interruptions.
Rolling mills and transmission equipment: Track gear mesh status and bearing health to reduce production losses.
Large motors: Diagnose broken rotor bars or loose stator windings to extend motor life.
Centrifugal pumps and propulsion systems: Bently Nevada 9200-06-05-05-00 monitors shaft alignment and bearing wear to improve operating efficiency.
Cooling tower fans: detect blade imbalance to reduce energy consumption and noise pollution.