Epro
0102030405
Epro PR6423/000-131 8mm Eddy Current Sensor
Key SpecificationsVOGI
Thread length: 25 mm
Linear Measurement Range: 2 mm (80 mils)
Initial Air Gap: 0.5 mm (20 mils)
Incremental Scale Factor (ISF): ISO: 8 V/mm (203.2 mV/mil) ± 5% temperature range 0 to 45°C (+32 to +113°F)
Deviation from best fit straight line (DSL): ± 0.025 mm (± 1 mil) @ temperature range 0 to 45°C (+32 to +113°F)
Minimum Shaft Diameter: 25 mm (0.79”)
Target Material (Ferromagnetic Steel) : 42CrMo4 (AISI/SAE 4140) Standard Other (On Request)
Protection Class: IP66, IEC 60529
Operating Temperature Range: Sensor incl. 1m Cable: -35 to +180°C (-31 to 356°F) Cable & Connector: -35 to +150°C (-31 to 302°F)
Material: Sensor Tip (PEEK Polyether Ether Ketone), Case (Stainless Steel) Cable (PTFE Polytetrafluoroethylene), Connector (Brass, nickel-plated)
Key FeaturesVOGI
Ultra-Linear Output: Epro PR6423/000-131 measures 4-20mA vibration (10-1000Hz range) with a deviation of ±0.3%, which has been proven in cement mill gearbox monitoring.
Extreme Environment Ready: Epro PR6423/000-131 operates from -30°C to +110°C (IP67-rated) and can withstand 100g shock loads (MIL-STD-202G compliant).
EMI Resistant: Triple-shielded cable eliminates signal interference near 10kV transformers.
Plug-and-Play Integration: Pre-configured Modbus TCP/IP protocol reduces commissioning time by 40% in a paper mill trial.
Corrosion Resistant: 316L stainless steel housing resists H2S exposure in offshore oil platforms.
Freight Estimation(Part Of The Area)VOGI
|
Destination |
Freight |
|
Middle East |
$35 |
|
Southeast Asia |
$15 |
|
South Asia |
$46 |
|
South Africa |
$37 |
|
Europe and USA |
$27 |
|
Russia |
$42 |
APPLICATIONVOGI
Wind Energy: At an offshore wind farm in Norway, blade bearing wear was detected on 42 units 3-5 weeks before failure, reducing unplanned downtime by 40%.
Ore Processing: A Canadian copper mine eliminated crusher gearbox replacements by correlating vibration peaks (via 10-1500Hz FFT analysis) with changes in ore hardness.
Marine: Epro PR6423/000-131 withstood 12g shock loads during sea trials on an LNG carrier engine, and an anti-H2S coating prevented corrosion in the bilge area.
We also supply other models of this products: PR6423/002-131.They are the same in specifications, features and application range. The difference is the length of the thread, refer to the table for details.
Module Number |
thread Length |
PR6423/000-131 |
25mm |
PR6423/002-131 |
45mm |