Epro
0102030405
Epro PR6423/016-011 8mm Eddy Current Sensor
Key SpecificationsVOGI
Thread length: 85mm
Linear Measurement Range: 2 mm (80 mils)
Initial Air Gap: 0.5 mm (20 mils)
Incremental Scale Factor (ISF): ISO: 8 V/mm (203.2 mV/mil) ± 5% temperature range 0 to 45°C (+32 to +113°F)
Deviation from best fit straight line (DSL): ± 0.025 mm (± 1 mil) @ temperature range 0 to 45°C (+32 to +113°F)
Minimum Shaft Diameter: 25 mm (0.79”)
Target Material (Ferromagnetic Steel) : 42CrMo4 (AISI/SAE 4140) Standard Other (On Request)
Protection Class: IP66, IEC 60529
Operating Temperature Range: Sensor incl. 1m Cable: -35 to +180°C (-31 to 356°F) Cable & Connector: -35 to +150°C (-31 to 302°F)
Material: Sensor Tip (PEEK Polyether Ether Ketone), Case (Stainless Steel) Cable (PTFE Polytetrafluoroethylene), Connector (Brass, nickel-plated)
Key FeaturesVOGI
Flexible Installation and Simplified Calibration: Equipped with M6/M10/M18 threaded mounting options, the Epro PR6423/016-011 adapts to diverse mechanical configurations. Pre-calibrated with a linear output (4-20mA/0-10V), it minimizes on-site adjustments—simply set the 0.5–2mm air gap between the probe and target surface for immediate operation. Integrated shielding reduces electromagnetic interference, ensuring stable signal transmission even near high-voltage equipment.
Multi-Parameter Diagnostics and Predictive Maintenance: Beyond vibration analysis, the Epro PR6423/016-011 enables phase-angle measurement for dynamic balancing and speed detection via keyphasor signals. Compatible with industrial IoT platforms, its data supports predictive maintenance strategies, identifying trends like rotor misalignment or thermal expansion risks. Regular recalibration intervals (6–12 months) ensure long-term accuracy with ±0.5% tolerance.
Freight Estimation(Part Of The Area)VOGI
|
Destination |
Freight |
|
Middle East |
$35 |
|
Southeast Asia |
$15 |
|
South Asia |
$46 |
|
South Africa |
$37 |
|
Europe and USA |
$27 |
|
Russia |
$42 |
APPLICATIONVOGI
Power Generation Turbines: The Epro PR6423/016-011 provides real-time vibration data for gas and steam turbines, enabling proactive maintenance to prevent unexpected downtime. Its high sensitivity detects early-stage imbalances or misalignments.
Oil and Gas Compressors: In pipeline compression stations, the Epro PR6423/016-011 monitors axial and radial vibrations, ensuring safe operation under extreme pressures and temperatures. This reduces wear and extends equipment lifespan.
Manufacturing Pumps: Integrated into centrifugal pump systems, this sensor identifies bearing defects or cavitation risks, optimizing production efficiency while minimizing repair costs.