Epro
0102030405
Epro PR6424/006-030 16mm Eddy Current Sensor
Key SpecificationsVOGI
Thread length: 100mm
Operating Temperature: -35°C to +380°C (sensor head), ensuring reliability in extreme environments like gas turbines or high-temperature compressors.
Accuracy: ≤1.0% linearity error when paired with EPRO CON021 preamplifiers, calibrated using 42CrMo4 steel (SAE 4140 standard) for plug-and-play installation.
Output Signal: DC voltage (-4V to -20V) with superimposed AC waveform for real-time vibration analysis.
Material & Durability: Stainless steel housing and PEEK sensor tip, resistant to 40g mechanical shocks .
Connection Options: M10×1 threaded design or flange mounting; armored cable with LEMO connectors or bare wire terminals.
Key FeaturesVOGI
Flexible Installation & Material Compatibility: Featuring M18×1.5 threaded mounts and optional flange adapters, the Epro PR6424/006-030 adapts to tight spaces in pumps or compressors. Pre-calibrated with 42CrMo4 steel (per SAE4140 standards), it supports custom calibration for alternative materials like stainless steel or Inconel, requiring only air gap adjustments (0.8–2.5mm) during installation.
Real-Time IoT Data Integration: With 4–20mA and Modbus outputs, the Epro PR6424/006-030 seamlessly integrates with platforms like Emerson’s MMS 6000 for predictive maintenance. Its LEMO connectors ensure stable signal transmission under electromagnetic interference, enabling early warnings for thermal expansion risks in power plant turbines.
Freight Estimation(Part Of The Area)VOGI
|
Destination |
Freight |
|
Middle East |
$35 |
|
Southeast Asia |
$15 |
|
South Asia |
$46 |
|
South Africa |
$37 |
|
Europe and USA |
$27 |
|
Russia |
$42 |
APPLICATIONVOGI
Hydraulic Excavator Arms: Attached to heavy-duty excavator joints, the Epro PR6424/006-030 detects structural fatigue from repetitive digging cycles, alerting operators to weld cracks before critical failures. Its NEMA 4X-rated housing resists mud and debris in construction sites.
Cement Kiln Drives: Applied in rotary kiln gearboxes, this sensor identifies misalignment-induced vibrations during clinker production. The Epro PR6424/006-030’s thermal shock resistance (-30°C to 200°C) ensures accuracy despite rapid temperature swings.
Port Crane Hoists: Mounted on cargo lifting winches, it monitors wire rope tension imbalances caused by uneven loads, preventing costly cable snaps during container handling. Dual CAN bus outputs enable real-time data fusion with safety PLCs.
We also supply other models of this products:PR6424/006-010, PR6424/001-030.They are the same in specifications, features and application range. The difference is cable length and thread length.Refer to the table for details.
Module Number |
Cable length |
Thread length |
PR6424/006-030 |
8m |
100mm |
PR6424/006-010 |
5m |
100mm |
PR6424/001-030 |
8m |
50mm |