Epro
0102030405
Epro PR6453/110-101 12.5mm Eddy Current Sensor
Key SpecificationsVOGI
Tip Diameter: 12.5 mm
Measurement range: ±1.0 mm Position;50 to 500 μm PP Vibration
Frequency Range: 0 to 20 kHz
Sensitivity: 8V/mm(203.2 mV/mil) ±1.5%
Sensor Body Thread: M18x1, M20x1, M20x1.5, M24x1
Temperature Range: -35 to 180°C (-31 to 250°F)
Agency Rating: CE, CSA, ATEX (see converter spec sheet)
Key FeaturesVOGI
High-Precision PLC/DCS Integration: The Epro PR6453/110-101 delivers ±0.5% linearity in detecting axial displacement and vibration, optimized for integration with PLC and DCS systems.Its 4–20mA/Modbus RTU outputs enable seamless data transmission to industrial control platforms, supporting real-time monitoring of rotor alignment and bearing health in turbines or compressors.
Robust Design for Demanding Environments: Certified for EEx ib IIC T6/T4 zones, the Epro PR6453/110-101 operates safely in explosive atmospheres like refineries or gas pipelines. The IP67-rated housing withstands temperatures from -30°C to +120°C, while its 42CrMo4-calibrated probe ensures plug-and-play installation without field recalibration.
Anti-Interference Signal Stability: Equipped with dual-layer shielding and differential signal technology, the Epro PR6453/110-101 minimizes electromagnetic noise from high-voltage equipment. This guarantees reliable performance in environments with heavy machinery or wireless interference.
Modular Compatibility & Global Standards: Featuring M18×1.5 threaded mounts and compliance with API 670 and ISO 10817-1, the Epro PR6453/110-101 adapts to global industrial applications, from power generation to pharmaceutical manufacturing. Its Kevlar-reinforced cables resist abrasion in offshore or high-vibration settings
Freight Estimation(Part Of The Area)VOGI
|
Destination |
Freight |
|
Middle East |
$43 |
|
Southeast Asia |
$16 |
|
South Asia |
$57 |
|
South Africa |
$46 |
|
Europe and USA |
$28 |
|
Russia |
$52 |
APPLICATIONVOGI
Nuclear Reactor Coolant Pumps: Installed on primary circuit pumps, the Epro PR6453/110-101 detects flow-induced vibrations in borated water environments, preventing seal degradation that could compromise reactor integrity. Its Inconel casing resorts neutron flux up to 1014n/cm².
Hypersonic Wind Tunnel Test Rigs: Mounted on scramjet engine prototypes, this sensor captures high-G vibration transients during Mach 8+ simulations. The Epro PR6453/110-101’s 100kHz sampling rate ensures microsecond-level anomaly detection for aerodynamic stress analysis.
Carbon Fiber Autoclave Drives: Integrated into composite curing systems, it monitors harmonic imbalances in high-pressure rotors, reducing curing defects by 60% while withstanding 250°C epoxy off-gassing.