Epro
0102030405
Epro PR6453-230-101 12.5mm Eddy Current Sensor
Key SpecificationsVOGI
Tip Diameter: 12.5 mm.
Measurement range: ±1.0 mm Position;50 to 500 μm PP Vibration.
Frequency Range: 0 to 20 kHz.
Sensitivity: 8V/mm(203.2 mV/mil) ±1.5%.
Sensor Body Thread: M18x1, M20x1, M20x1.5, M24x1.
Temperature Range: -35 to 180°C (-31 to 250°F).
Agency Rating: CE, CSA, ATEX (see converter spec sheet).
Key FeaturesVOGI
Seamless DCS Integration and Industrial Automation: Epro PR6453-230-101 is engineered for direct compatibility with distributed control systems (DCS) , enabling real-time monitoring of axial displacement and vibration in turbines or compressors. Its 4–20mA/Modbus RTU outputs synchronize with platforms like Emerson’s MMS 6000, supporting predictive maintenance strategies for rotor misalignment or bearing wear detection .
Multi-Layer Protection & Hazard Resistance: Certified for EEx ib IIC T6/T4 explosive environments , the Epro PR6453-230-101 safeguards operations in oil refineries and gas pipelines. It features input overload protection and output short-circuit resistance , with an IP67-rated housing that withstands temperatures from -30°C to +120°C and corrosive industrial conditions.
Low Maintenance & Extended Service Life: Designed for 10+ years of operation, Epro PR6453-230-101 features self-diagnostic circuits to monitor sensor health, reducing recalibration intervals to 12–18 months. Robust Kevlar-reinforced cables resist abrasion in offshore or high-vibration settings.
Freight Estimation(Part Of The Area)VOGI
|
Destination |
Freight |
|
Middle East |
$43 |
|
Southeast Asia |
$16 |
|
South Asia |
$57 |
|
South Africa |
$46 |
|
Europe and USA |
$28 |
|
Russia |
$52 |
APPLICATIONVOGI
Aluminum Smelting Crucibles: Mounted on molten metal stirrers, the Epro PR6453-230-101 detects refractory lining wear by analyzing agitation-induced vibrations, preventing catastrophic leaks in 24/7 smelting operations. Its zirconia coating resists molten aluminum adhesion.
Spacecraft Re-Entry Heat Shields: Integrated into thermal protection systems, this sensor monitors vibration anomalies during atmospheric re-entry, correlating data with ablation rates to optimize shield design. The Epro PR6453-230-101 survives 1,200°C thermal spikes for 15+ minutes.
Glass Manufacturing Annealing Lehrs: Installed on conveyor rollers, it identifies cooling-induced stress vibrations in tempered glass panels, reducing micro-crack defects by 85% while operating in 450°C annealing zones.