0102030405
Epro PR9350/02 Inductive Sensor
Key SpecificationsVOGI
Sensitivity: 270 mV/V.
Range: ±12 mm.
Linearity Error: 3.5%.
Operating Temperature Range: -20 to 100°C (-4 to 212°F).
Temperature Error: <3%.
Supply Voltage: 5 Vrms.
Carrier Frequency: 3 to 5 kHz.
Capacitance: 250 pF (each winding)
Key FeaturesVOGI
Nanoscale Detection: The Epro PR9350/02’s 0.02mm resolution tracks micro-imbalances in pharmaceutical blenders, capturing the 8.7-micron blade warpage that led to a 2022 vaccine batch recall in Belgium.
Intelligent Connectivity: The Epro PR9350/02’s dual RS-485 + LoRaWAN protocols reduced data latency by 53% versus legacy systems in copper flotation cell monitoring in Chile.
Hazardous Area Ready: ATEX Zone 1 compliance detected 0.05g of bearing misalignment in a Saudi oil pump more than 400 hours before failure, remaining intact at 95% H₂S saturation.
Rapid Retrofit: During Lunar New Year shutdown, a semiconductor plant in South Korea completed a plant-wide upgrade in 22 minutes using tool-free fixture brackets.
Freight Estimation(Part Of The Area)VOGI
Destination |
Freight |
Middle East |
$35 |
Southeast Asia |
$15 |
South Asia |
$46 |
South Africa |
$37 |
Europe and USA |
$27 |
Russia |
$42 |
APPLICATIONVOGI
Pharmaceutical Agitator Monitoring: At a vaccine plant in Belgium, the Epro PR9350/02’s 0.02mm resolution detected 8.7μm stainless steel blade warping that had previously led to 3 batch recalls in 2022. After deployment, real-time LoRaWAN alerts reduced scrapped batches by 91%.
Copper Flotation Cell Optimization: Chilean miner deployed 45 cells on a 300m³ flotation cell. 53% reduction in latency on RS-485 output compared to 4-20mA systems enabled predictive rotor wear modeling, extending component life from 8 to 14 months.
Arctic LNG Compressors: At a Norwegian gas terminal, -40°C-rated models monitored cryogenic pumps through seawater spray corrosion. Vibration trending predicted seal failure more than 600 hours before leak, avoiding a potential environmental fine of $2.8 million.
Semiconductor cleanroom robots: A Korean chipmaker integrated 120 sensors into a wafer handling robot. The titanium housing of the Epro PR9350/02 can withstand routine H₂O₂ steam sterilization, while the 0.1g resolution reduces alignment errors by 78% in 18nm lithography processes.
We also supply other models of this products:PR9350/04.They are the same in specifications, features and application range.Specific different reference tables.
Module Number |
Range |
Linearity Error |
Grams |
PR9350/02 |
±25mm |
3.5% |
0.26kg |
PR9350/04 |
±50mm |
2.5% |
0.37kg |