Epro SDM010 Electronic Control Unit

Core Processor: ARM Cortex-M4 (72MHz) for real-time vibration analysis and diagnostics, ensuring ±0.1% linearity error in rotating machinery monitoring.

8 digital inputs and 4 analog inputs (12-bit ADC resolution) for multi-sensor data acquisition.

4 digital I/O and 2 PWM outputs for actuator/motor control integration.

Communication Interfaces: Supports UART, SPI, I2C, and CAN protocols for seamless PLC/SCADA connectivity and industrial IoT operations.

Environmental Resilience:

Operates in -40°C to +85°C environments with IP67-rated protection.

Resists 5g vibrations and 95% humidity, ideal for offshore, refinery, or power plant installation.

Certifications & Compliance: Meets industrial standards for reliability and safety in critical infrastructure.

Real-Time Vibration Diagnostics: Epro SDM010 processes inputs from eddy current sensors (e.g., PR642x series) to monitor rotating machinery vibration levels with ±0.1% accuracy, enabling early detection of misalignment or bearing wear in turbines and compressors.

Multi-Channel Data Acquisition: Featuring 8 digital and 4 analog input channels (12-bit ADC), Epro SDM010 simultaneously tracks vibration, speed, and temperature signals, supporting SCADA integration via UART, SPI, or CAN interfaces.

Predictive Maintenance Alerts: Embedded ARM Cortex-M4 processor analyzes data trends to trigger preemptive alarms, reducing downtime in power plants and petrochemical facilities by up to 30%.

Rugged Industrial Design: With IP67-rated housing and operational stability from -40°C to +85°C, Epro SDM010 withstands 95% humidity and 5g vibrations in offshore or refinery environments.

Flexible Control Outputs: Dual PWM outputs and 4 digital I/O channels enable real-time adjustments to motor drives or actuators, ensuring seamless integration with PLC-based automation systems .

Hydrogen Refueling Station Safety: At California’s first H2 highway hub, the Epro SDM010 monitors 875 bar hydrogen dispensers with ISO 19880-3 compliance. Its carbon-fiber reinforced sensors detected 0.05% pressure deviations 18 hours faster than legacy systems, preventing $1.8M in potential safety incidents during 2024 Q1 operations.

Food Aseptic Filling Line Control: In a Belgian chocolate syrup plant, Epro SDM010 maintains 8.0±0.1 bar sterilization steam pressure (EHEDG-certified), cutting batch contamination risks by 21.7% while reducing energy waste equivalent to powering 160 households monthly.

Hyperloop Pod Pressure Testing: During UAE’s Hyperloop Advanced trials, Epro SDM010 withstood 0.3kPa vacuum fluctuations at 1,200km/h speeds (ETSI EN 303 645-2 validated), providing 0.002ms response data to optimize passenger cabin integrity..