Foxboro
0102030405
Foxboro FBM201 P0914SQ Analog Input Interface Modules
Key SpecificationsVOGI
Input Channels: 8 isolated and independent channels.
Input Channel Impedance: Nominal 61.5 Ω. Common Mode Rejection: >100 dB at 50 or 60 Hz.
Normal Mode Rejection: 95 dB or higher at 50 or 60 Hz.
Power Consumption: 7 W, with a maximum peak rating,
Power Dissipation: Less than 3 W.
Operating Voltage: 24 VDC, with a maximum rated value of 28.6 VDC, and the maximum for contact input is 32 VDC.
Operating Temperature: -40°C to +70°C (-40°F to +158°F).
Storage Temperature: -55 to 90°C.
Relative Humidity: 5% to 95% (noncondensing).
Altitude: -300 m to + 12,000 m (-1000 ft to 40,000 ft).
Key FeaturesVOGI
Multi-channel Analog Input: Foxboro FBM201 gives the input of analog sensor signals through 8 channels whose accepted signals vary from 0 to 20 ma dc, 0 to 100 mv dc, 0 to 5v dc, and 0 to 10 v dc, which will conform to different industrial measurement needs.
Galvanic Isolation: Each analog input channel of this Foxboro FBM201 is galvanically isolated from the other channels and the ground to guarantee signal fidelity and stability by avoiding noise problem, channel interference, etc.
High Precision: High-precision analog signal acquisition is performed using the sigma-delta data conversion technique on each of the channels, accomplishing accurate measurements.
Flexible Configuration: Configuration of conversion time by the user in keeping with special needs makes the module more flexible and adaptable.
Status Indicators: Available status and diagnostic information with LED indicators make monitoring the module easy and fast for easy identification of possible problems.
Redundant Communication: Foxboro FBM201 supports redundant communication paths to improve reliability in data transmission and system operation.
Hot-swappable Design: Enables installation and maintenance without impacting system operation and minimizes system idle time.
Freight Estimation(Part Of The Area)VOGI
|
Destination |
Freight |
|
Middle East |
$35 |
|
Southeast Asia |
$23 |
|
South Asia |
$45 |
|
South Africa |
$37 |
|
Europe and USA |
$24 |
|
Russia |
$41 |
APPLICATIONVOGI
Oil and gas industry: Foxboro FBM201 is suitable for pipeline pressure, flow and tank level monitoring, supports high temperature, high pressure and corrosive media environment, and ensures production safety and efficiency.
Power and energy management: Foxboro FBM201 is used for real-time parameter monitoring (such as vibration, temperature) of generators, boilers and turbines, to help equipment status maintenance and energy efficiency optimization.
Chemical and process industries: Adapt to the precise measurement of equipment such as reactors and distillation towers, withstand extreme working conditions (explosion-proof/corrosion-proof), and ensure process stability and compliance.
Smart factory: Integrate into the control system through Foundation Fieldbus (FF) or HART protocol to support remote monitoring and data-driven predictive maintenance.