GE 531X133PRUALG1 PROCESS INTERFACE BOARD

Input Voltage: 28V DC.

Processor: 32-bit RISC CPU, 266MHz.

Operating Temperature: -30°C to 65°C.

I/O Pack Rating: Class 1, Div. 2.

Equipped with: Ambient temperature sensor.

Potentiometer: 7.

Resistor Network Arrays: 5.

Aluminum Electrolytic Capacitor: 1

Terminal Strip: 1 three-position.

Cable Connectors: 2 male vertical pin.

Signal Processing: GE 531X133PRUALG1 isolates and converts the input signal to the appropriate one that the connected control systems require.

Easy Installation: Comes with drilled holes in all four corners for simple installation. GE 531X133PRUALG1 also has a 3-position terminal strip as well as two male vertical pin cable connector and header connector to allow various wiring and connection methods.

Jumper & Test Point: GE 531X133PRUALG1 has jumper switches for configuration and a lot of test points for trouble shooting. Gen-2 also adds a seven-position "tach range" switch allowing the user to set the appropriate input range for the tachometer.

The CPU is a high-speed processing unit that can read and write millions of words as data, with a maximum of 32K I/O that can be handled under different programming languages, completing various complex applications effortlessly.

Aerospace engine fuel control systems: commercial military aircraft fuel transfer pump housing or flow control valve assemblies;

Gas turbine auxiliary systems: fuel injectors or lube line connectors for combined cycle power plants

Industrial process valve components: petrochemical high pressure valve actuator or heat exchanger sealing parts;