GE DS200FCGDH1BCA Control Module PC Board

Input power: 120V AC ±20%, 50/60Hz

Input signal: 4-20mA compatible

Output signal: 0-10V DC analog output, maximum output current 2A

Communication interface: VME backplane bus relying on Mark V system

Operating temperature: -30°C to +55°C

Humidity: 5%-95% (non-condensing)

Certification and compliance: CE certification (EMC, LVD), IEC 61131-2 industrial control standard

Precise control: Six-pulse phase control realizes synchronous triggering of thyristor bridge arms, and DS200FCGDH1BCA supports millisecond response and dynamic load timing adjustment.

Intelligent diagnosis: DS200FCGDH1BCA collects bridge voltage/current/frequency signals in real time, has built-in overcurrent protection and system heartbeat monitoring, and the IMOK light intuitively feedbacks faults.

High reliability: Optical fiber transmission is anti-interference (delay ≤5μs), the metal shielding shell adapts to -30°C~+55°C environment, and supports 120V AC wide power supply.

Modular adaptation: VME bus architecture seamlessly connects to Mark V controller, and DS200FCGDH1BCA can integrate Predix platform for remote monitoring.

Easy maintenance: Hot-swappable design supports fault replacement within 30 minutes, and long-life spare parts guarantee reduces operation and maintenance costs.

In gas turbine LCI systems, its ±1μs triggering accuracy and overcurrent protection function can improve commutation reliability and equipment life.

Gas turbine LCI system: GE DS200FCGDH1BCA

Provides ±1μs thyristor triggering accuracy for load-commutated inverters, improving startup reliability and commutation success rate.

Large motor drive: GE DS200FCGDH1BCA

Suitable for soft starting and speed regulation of high-voltage motors in metallurgy, petrochemicals, etc., and reduces equipment failure rate through dynamic timing adjustment and overcurrent protection.

Power electronics monitoring: GE DS200FCGDH1BCA

Real-time acquisition of bridge signals for fault pre-diagnosis, suitable for equipment status monitoring such as HVDC converter valves and SVCs.

Harsh industrial scenarios: GE DS200FCGDH1BCA

Anti-strong electromagnetic interference, wide temperature (-30°C~+55°C) design is suitable for petrochemicals and metallurgy, and supports VME bus system integration.

Intelligent O&M: GE DS200FCGDH1BCA

Can be connected to the Predix platform for remote monitoring and predictive maintenance, dynamically managing loads to improve energy efficiency by 1.5%~2%.

Its fiber isolation, hot-swap maintenance and explosion-proof configuration (optional) significantly improve the availability and O&M efficiency of key equipment in extreme environments.