GE DS200SDCIG1AFB Power Supply and Instrumentation Board

Input Voltage: Standard redundant 230V AC input.

Operating Temperature Range: 0°C to 60°C.

Storage Temperature Range: -40°C to 85°C.

Servo Coil Current: Servo coil current selectable between 10 and 120mA via jumper.

Internal Power Distribution: Internal power distribution module fuses isolate and feed 125V DC to separate power supplies in each controller, each internal feeder is monitored by diagnostics, and LED indicators are located next to each fuse.

Servo Output and LVDT I/O: GE DS200SDCIG1AFB is a single-servo I/O terminal board that supports two servo outputs and I/O for six LVDT position sensors, allowing for precise control and monitoring of servo motors and position sensors for accurate motion control and position feedback.

Topology: In the GE DS200SDCIG1AFB, the pulse rate input is the common input for the active pulse rate. There is a high-speed pulse output corresponding to the flow, which can accurately measure and monitor the flow rate of the medium, including a real-time display.

Configuring Jumper: It selects the servo coil current between 10 to 120mA where you can adjust according to the requirement of the servo motor to keep the servo system function normal and ensure good performance.

Grounding and Decoupling: GE DS200SDCIG1AFB onboard functions and high-frequency decoupling to the ground, the same as the TSVO, so stable and reliable signal does not interfere.

I/O Module: Input/output module of the control system, used to collect sensor signals and output control instructions.

Thermal Power Plant: Thermal power plant, combined cycle power plant or distributed energy system (DER) integrated into the Mark VIe controller.

Industrial Field: Industrial drive and mechanical control, which can be expanded to large industrial drive equipment, with high-precision control and fault diagnosis capabilities.