GE DS200SDCIG1AHB Electric Instrumentation Board

Power input: 5V and 15V DC

Fuses: There are multiple, for 115V power, positive signal power, negative signal power, 15A NRX components, 10A NRX components

Jumpers and switches: Equipped with manually movable Berg-type jumpers and DIP switches, such as JP1 MD control source jumper, JP2 MA AC contactor trip time jumper, SW1 selects AC line load switch according to nominal DC output current

Protection components: Contains hardware components such as rectifiers, diodes, capacitors, etc. for voltage limitation

Power-On Initialization: Upon receiving power, GE DS200SDCIG1AHB instantly commences a self-check protocol. These microcontrollers and FPGAs will perform integrity checks on their internal memories, registers, and connected peripherals. Once finished, the unit sits waiting for incoming data.

Sensor Data Acquisition: GE DS200SDCIG1AHB is always polling over numerous sensors in an actual industrial use case. In a manufacturing plant, for example, it collects machine vibration, temperature, and rotational speed data. This real time data is then routed to the processing units onboard.

Intelligent Processing and Control: The microcontrollers and FPGAs process the collected data using preset algorithms. These algorithms are tailored towards optimizing production processes and safety while enhancing efficiency. Control signals are generated based on this processed data.

Power Plant Automation: Part of the Mark VIe system for data and logic information as well as protection and communication.

Crisis Protection System: Triggering various safety mechanisms such as overspeed shutdown, vibration protection, and lubrication failure.

Industrial System Example: Closed-loop control and condition monitoring of large compressors/pumps.