GE IC200MDL632 16-Point Discrete Input Module

Number of channels: 16 relay outputs

Contact type: SPDT (single pole double throw)

Rated voltage: 24 VDC/250 VAC

Rated current: 2 A/point, 1 A/point

Channel isolation: optocoupler isolation, isolation voltage 1500 VAC (for 1 minute).

Power supply isolation: The output circuit is isolated from the backplane power supply, with strong anti-interference ability.

On time: ≤ 10 ms

Off time: ≤ 5 ms

Operating temperature: 0°C to +60°C

Storage temperature: -40°C to +85°C.

Humidity: 5%-95% non-condensing.

Vibration resistance: 10-500 Hz, 5G (operating state)

Shock resistance: 30G (non-operating state)

LED Indicator: Each channel of GE IC200MDL632 is equipped with a green LED to display the output status (lit to indicate output activation).

Protection Function

Overcurrent Protection: GE IC200MDL632 has a built-in fuse to prevent output short circuit from damaging the module.

Surge Suppression: RC network protects relay contacts and extends service life.

Configuration Flexibility

Voltage Selection: GE IC200MDL632 selects DC or AC output through jumpers (must be configured according to the same voltage type).

Output Grouping: Supports 8 points/group isolation, which can independently control different loads.

Industrial automation: GE IC200MDL632 can control solenoid valves, contactors, indicator lights and other equipment.

Process control: realize logic control such as valve switching, motor start and stop.

Equipment integration: GE IC200MDL632 is used as the output terminal of the distributed I/O system to connect the field actuator.