GE
GE IC693MDL648 Positive/Negative Logic Input Module
Key SpecificationsVOGI
Voltage shredder: positive10V from +30V DC
ON state: ≥ +15V DC
OFF state: ≤ +5V DC
Inputcurrent: 5 mA/point (@ 24V DC)
To system isolationvoltage: 1500V AC
Response time: ON to OFF: ≤ 1 ms (Nominal)OFF to ON: ≤ 1 ms (Typical)
Over voltage protection:±35V DC peak (transient)
Power supply on the back of the backplane: +5V DC (60 mAmax.)
External power supply; The input loop current is supplied by an external 24V DC power supply
Operation temperature: 0° to 60°c (32° to 140°f). storage temperature: -40° to 85°c(-40° to 185°f)
Humidity: 5%-95%non-condensing
Vibration: 5to 500 Hz, 2 g(IEC 60068-2-6)
Shock: 15 g, 11ms (IEC 60068-2-27)
Key FeaturesVOGI
High-density isolated input
GE IC693MDL648 is suitable for high-density signal acquisition, which effectivelyreduces the number of modules, supports both NPN (sink type) and PNP (source type) signal devices, Sink/Source is compatible a variety of sensors (such as proximity switches, photoelectric sensors).
Highspeed response and anti interference
Signal Processing Is Fast: the response time is less than or equal to 1ms (ON/OFF switching), the IC693MDL648 can be used in high-speed control applications (such as machinesorting start and stop).
IC693MDL648 with built-in noise filter: prevent short duration pulse interference (i.e.,electromagnetic noise) and enhance the stability of signal.
Industrial-gradeprotection and isolation
Electrical isolation protection: 1500V isolation between input and system, to prevent high voltage from entering the PLC backplane to protect itssystem.
Reverse wiringprotection: The IC693MDL648 can be reverse wired to prevent module damage caused by mis-wiring.
Overvoltage protection: IC693MDL648 supports transient ±35V DC Overvoltage shock (for example,due to lightning or a line power surge).
It prefers A to exchange with B instead ofreverse. Visual diagnostics and easy maintenance
LED status indication:
Independent GREEN LED for each channel - indicationof input signal status (ON/OFF), fast finding fault points like sensor's disconnection.
Module status LED: Indicates power/fault(ex. overload and communication abnormally).
Removable terminal block: Easywiring or replacement to minimize downtime for maintenance.
Freight Estimation(Part Of The Area)VOGI
|
Destination |
Freight |
|
Middle East |
$42 |
|
Southeast Asia |
$15 |
|
South Asia |
$56 |
|
South Africa |
$46 |
|
Europe and USA |
$27 |
|
Russia |
$51 |
APPLICATIONVOGI
Factory automation: status of productionequipment (cylinders, safety door switch, etc.) are monitored by GE IC693MDL648.
Logistics and warehousing: GE IC693MDL648 is used to collect the photoelectric sensor signal ofthe conveyor belt to realize the control of the sorting of the materials.
Power equipment monitoring: Determine the on or offcircuit breaker status or alarm contact signals.