Siemens
0102030405
Siemens 6DD2920-0AB1 Interface Module
Key SpecificationsVogi
Communication Interface: Supports PROFIBUS - DP master/slave communication protocol.
Transmission rate: 12Mbps.
Response time: ≤1ms.
Environmental Conditions:
Operating temperature: -25℃ to +60℃
Protection level: IP20.
Electrical Characteristics:
Operating voltage: 24V DC ±20%.
Power consumption: ≤15W.
Input/Output Configuration: 6-channel digital input.
Key FeaturesVogi
Overcurrent Protection: Siemens 6DD2920-0AB1 identifies phase and ground over-current faults to cause circuit breaker tripping and prevent damage to devices.
Motor Protection：Monitoring motor thermal overloads, phase imbalance and under/over-voltage.
Under-frequency/Over-frequency Protection: Protects from under-frequency or over-frequency situations in power systems.
Breaker Control: Provide remote or local control of circuit breakers and switches
Action Customization: Siemens 6DD2920-0AB1 employs inbuilt CFC (Continuous Function Chart) logic for custom protection schemes and automation sequences.
Event Logging: Stores fault records, alarms, and oscillography data for diagnostics.
Measurement：Provides real-time data on voltage, current, power (kW/kVAR), and energy consumption.
Freight Estimation(Part Of The Area)Vogi
|
Destination |
Freight |
|
Middle East |
$35 |
|
Southeast Asia |
$23 |
|
South Asia |
$45 |
|
South Africa |
$37 |
|
Europe and USA |
$24 |
|
Russia |
$41 |
ApplicationSVogi
Robot Control：Siemens 6DD2920-0AB1 takes instructions from the robot controller and controls the motion of each joint of the robot. It can also collect sensor feedback signals through encoder, force sensors and other sensors mounted on the robot to implement accurate position and force control of the robot, so as to enable the robot to complete complex tasks such as welding, painting and handling.
Water Treatment Plant: Based on the control strategy, it sends control commands to digital output channels to control the opening and closing of water inlet and outlet valves, the start and stop of water pumps, and the operation of aeration equipment.
Food and Beverage Factory：The digital inputs channels of the module receive the status signals coming from sensors located on conveyor belt, such as the detection signals of bottle presence and conveyor belt speed. These digital output channels allow for control of motor starting and stopping of the conveyor belt and operation of bottling valves.
Intelligent building system: Siemens 6DD2920-0AB1 integrates into the building automation platform, realize the logical control of lighting, air conditioning and other equipment. This can be applied in an office building, It could set up multiple lighting scenes according to the time period and different occupancy situation.