Siemens
0102030405
Siemens 6DS1618-8CA Binary Input Module
Key SpecificationsVogi
Operating Voltage: 24 V DC.
Current Consumption: ≤ 200 mA.
Input Range: 0 - 10 V / 4 - 20 mA.
Output Type: Digital, analog.
Communication Protocol: Profinet, EtherCAT.
Temperature Range: - 25 °C to + 60 °C.
Compatibility: Compatible with Teleperm M and Teleperm ME process control systems.
Key FeaturesVogi
Predictive maintenance function: Siemens 6DS1618-8CA can self-check LED indicator and web interface diagnostic tools can analyze potential faults such as contact wear and temperature abnormality, which can reduce the frequency of on-site maintenance.
Overload & short circuit protection: Wide current rating range of 100–600A, four tripping curve of Type B/C/D optional, adapts to different load types.
Short-circuit protection：0.1–0.3 seconds fast trip to prevent the short-circuit current from causing damage to the equipment that is fatal.
Low Standby Power Consumption: ≤1.5W ( better than industry average 2W) which supports green building energy efficiency rating.
Harmonic filtering compatibility: Siemens 6DS1618-8CA is connected with Siemens Sinusoidal Filter system, suppress the 15th harmonics produced by the inverter from distorting the grid, and avoids sensitive devices being damaged.
Flexible installation: Can be installed on DIN rails as well as on panels, applicable to narrow of spaces (such as cabinets) or large area distribution cabinets.
Freight Estimation(Part Of The Area)Vogi
|
Destination |
Freight |
|
Middle East |
$35 |
|
Southeast Asia |
$15 |
|
South Asia |
$23 |
|
South Africa |
$37 |
|
Europe and USA |
$24 |
|
Russia |
$42 |
ApplicationsVogi
Process Control Systems：Used in the industry most notably in Distributed Control Systems (DCS) of oil and gas, petrochemical plants, and power generation. It enables accurate monitoring and control of valves, pumps, and actuators.
Safety-Critical Systems：Used within Safety Instrumented Systems (SIS) to enforce emergency shutdowns, fire and gas detection, and other safety measures Its redundancy features are adapted to SIL requirements.
Industrial Control: Siemens 6DS1618-8CA is used to protect motors, compressors and other equipment, can support Type D tripping curves, to deal with high-frequency start-stop scenarios, can implement PLC linkage control through Modbus/TCP/IP protocol;
Renewable Energy: 30kA surge protection for photovoltaic inverter, adaptation to different lightning protection requirements and compatibility with harmonic filter systems to improve grid quality.