Siemens 6ES7195-7HE80-0XA0 bus module

Input: 24 V DC (via system power).

Current Capacity:

Max. Current per Channel: 2 A (for sensor/actuator supply).

Terminal Type: Screw-type terminals.

Protection Class: IP20 (for control cabinet installation).

Operating Temperature: -20°C to +60°C.

High-precision synchronisation: Siemens 6ES7195-7HE80-0XA0 supports PROFINET IRT protocol to achieve µs-level time synchronisation, suitable for multi-axis robot collaboration, high-speed packaging lines and other scenarios with stringent timing requirements.

Chip-level health monitoring: real-time monitoring of module voltage, temperature and signal quality, generating diagnostic reports through TIA Portal, and pinpointing faults on each channel.

Single Wire Design: Single cable connection between power and communication through BASE module, reducing wiring complexity and cost by up to 40%.

Dynamic Power Management:  Siemens 6ES7195-7HE80-0XA0 dynamically adjusts power supply according to load (e.g. dormant unused channels), reducing energy consumption by 20% and meeting ISO 50001 energy efficiency standards.

Freeze-dryer process monitoring: Siemens 6ES7195-7HE80-0XA0 has real-time acquisition of vacuum (0.001mbar resolution) and temperature (±0.01°C). Complies with FDA 21 CFR Part 11 electronic record specification.

Multi-robot cooperative welding: µs-level synchronisation of multiple welding robots (e.g. KUKA, Fanuc) via PROFINET IRT, ensuring bodywork joint accuracy of ±0.1mm. 

Wastewater plant aeration optimization:Siemens 6ES7195-7HE80-0XA0 is integrated dissolved oxygen and ammonia nitrogen sensors, AI algorithm dynamically adjusts the blower, saving 30% energy.

BMS Integration for Energy Storage Plant: Collect voltage (accuracy ±0.05%) and temperature of thousands of battery cells, and upload them to the cloud to optimize charging and discharging strategies through OPC UA.

High-speed can production line: Synchronised control of filling (600 cans/min), sealing and palletising robots with positioning error <±0.5mm. 

Wafer etching machine control: Synchronised gas flow (±0.1sccm), RF power (±1W) and temperature (±0.05°C) to ensure nanoscale etching accuracy.

Continuous casting machine crystalliser level control:  Siemens 6ES7195-7HE80-0XA0 redundantly collects steel level (±0.5mm accuracy) and triggers emergency shutdown to prevent steel leakage.

Automatic adjustment of mill thickness: real-time optimization of roll pressure through AI algorithm, tolerance control <20μm.