Siemens 6ES7416-5HS06-0AB0 Central Processing Unit

Processor type: CPU 416-5H, based on 64-bit reduced instruction set architecture, processing speed of 12.5 nanoseconds/instruction.

Storage capacity: 16 MB.

Program storage space: supports 320,000 steps of user program.

Interface type:

1 MPI/DP interface (12 Mbps), supporting programming device and HMI connection.

1 PROFIBUS DP interface (12 Mbps) for distributed I/O expansion.

1 PROFINET interface (10/100 Mbps), supporting TCP/IP and real-time communication (IRT).

2 synchronization module interfaces for synchronous control of redundant systems.

Power supply voltage: 24 V DC (±10%), power consumption ≤ 18 W.

Dimensions and weight: 219 mm × 50 mm × 290 mm, weight about 1.314 kg.

Processing capacity: supports multi-task parallel processing, can manage 131,072 digital I/O points and 8,192 analog I/O points.

Redundancy switching time: < 20 milliseconds, ensuring seamless system switching.

Real-time clock: built-in hardware clock, accuracy ±1 minute/month (25℃).

Environmental adaptability

Operating temperature: -25℃ to +60℃ (standard type), -40℃ to +70℃ (SIPLUS extended type).

Protection level: IP20

Dual CPU redundant architecture: Siemens 6ES7416-5HS06-0AB0 supports S7-400H system, realizes real-time synchronization of dual CPUs through redundant backplane bus, and can automatically switch when any CPU fails to ensure continuous operation.

Hot-swap function: Siemens 6ES7416-5HS06-0AB0 supports online module replacement to reduce downtime.

Powerful communication capability

Multi-protocol integration: PROFINET, PROFIBUS DP, MPI and other interfaces can communicate seamlessly with third-party devices and SCADA systems.

Distributed I/O support: Siemens 6ES7416-5HS06-0AB0 can be expanded through modules such as ET 200M to meet the needs of complex industrial sites.

Safety and reliability

SIL 3 certification: Complies with IEC 61508 standards and is suitable for safety-related systems.

Fault diagnosis: Built-in LED indicators and diagnostic buffers monitor power supply, temperature, and communication status in real time.

Data encryption: supports password protection and data integrity verification to prevent unauthorized access.

Modular design: supports S7-400 series expansion modules.

Firmware compatibility: higher version firmware is backward compatible without reconfiguration.Freight Estimation(Part Of The Area)

Manufacturing
Production line automation: Real-time control and monitoring of high-speed production lines such as automobile manufacturing and electronic assembly, improving efficiency by more than 30%.

Robot integration: Collaborative operation with industrial robots through PROFINET interface to achieve precise positioning and motion control.

Energy and power

Power system: Substation automation, grid monitoring, and support for redundant architecture to ensure power supply continuity.

Renewable energy: Equipment management and fault-tolerant control of wind power and photovoltaic power stations.

Process industry

Chemical and pharmaceutical: Reactor control, distillation tower adjustment, meeting SIL 3 safety level requirements.

Water treatment: Pump group control and water quality monitoring of sewage treatment plants, supporting long-term operation in harsh environments.

Transportation and infrastructure

Smart buildings: HVAC systems, elevator group control, energy optimization and fault self-diagnosis.

Rail transportation: Signal system, tunnel ventilation control, support for redundant communication networks.

Other high-reliability scenarios

Aerospace testing: Complex data collection and real-time control of simulated flight environments.

Oil and gas: Remote monitoring and emergency shutdown (ESD) systems for offshore platforms.