Siemens S30810-Q2309-X-6 Hipath LAN Switch

Rated Voltage: 230 V AC.

Current Rating: 16–32 A.

Breaking Capacity: ≥6 kA.

Poles: 1P.

Standards Compliance: IEC/EN 60947-2 (industrial circuit breaker standard).

Mounting: DIN rail compatible (TS35/7.5/15).

Protection Features: Overload, short-circuit, and possibly arc fault detection.

Operating Temperature: -25°C to +60°C. 

Double insulation protection: The isolation voltage between Siemens S30810-Q2309-X-6 and the coil is 4kV, and the protection level is IP20 (IPXXB after installation), which prevents arc interference from causing short circuit.

Quick replacement design: The contact module and the coil are independently packaged. When damaged, only the faulty unit needs to be replaced, which shortens the maintenance time by 70%.

Status feedback interface: Optional IO-Link communication module (3RX3) uploads contact status, coil voltage and fault code in real time to support predictive maintenance.

Anti-surge design: The main contact of Siemens S30810-Q2309-X-6 adopts silver alloy material and magnetic blow-out technology, with a breaking capacity of 100kA (IEC 60947-4-1), which can withstand 8~12 times the peak current at the moment of motor starting.

Switch life: The mechanical life reaches 10 million times (AC-3), and the electrical life is 500,000 times, which is far superior to similar products.

Pump and fan drive: Siemens S30810-Q2309-X-6 can monitor motor running time and start-stop times through IO-Link, optimize maintenance cycle, and achieve smooth acceleration in combination with soft starter.

Conveyor belt system: multi-contactor cascade control, cooperate with mechanical interlock module to prevent grid shock caused by simultaneous start of multiple motors.

HVAC system: automatically start and stop air conditioning units according to building automation system (BAS) instructions, and dynamically adjust running time in energy-saving mode.

Lighting circuit management: Siemens S30810-Q2309-X-6 controls high-power LED lighting arrays, and achieve time-sharing dimming through time relay modules (3RP2).

Photovoltaic inverter switching: automatically switch loads between grid-connected and off-grid modes, and the high temperature resistance of the main contacts is suitable for outdoor inverter cabinet environments.

Energy storage battery management: Siemens S30810-Q2309-X-6 controls battery charging and discharging circuits, and integrate electronic overload relays to prevent overcurrent damage to energy storage units.