VIBRO-METER
Vibro-Meter CE310 piezoelectric accelerometer
Technical ParametersVOGI
Sensing Element: Symmetrical shear-mode piezoelectric crystal
Sensitivity: 50 µA/g (current-mode output)
Measurement Range: ±40 g peak
Frequency Response: 2 Hz – 10 kHz (±5 %)
Resonant Frequency: ≥ 25 kHz
Output Type: Two-wire 4–20 mA IEPE loop
Loop Supply: 16–30 V DC, 4 mA bias
Settling Time: < 2 ms to 90 %
Temperature Range: –40 °C to +125 °C operating; –55 °C to +150 °C storage
Shock Survivability: 5 000 g, 0.5 ms (half-sine)
Vibration Endurance: 10 g, 10–2 000 Hz
Housing: 316L stainless steel, IP67 sealed
Mounting: ¼″-28 UNF stud or adhesive pad
Cable: 5 m PTFE-insulated two-wire loop cable
Key Features
VOGI
Integrated 4–20 mA Loop Output
Built-in IEPE electronics convert charge to a stabilized current loop, eliminating the need for separate conditioning modules.
Wideband Performance
Flat frequency response from 2 Hz to 10 kHz captures both low‐frequency machinery sway and high‐frequency bearing or gear defects.
High Shock Tolerance
Survives up to 5 000 g shock pulses without sensor damage, ensuring reliability in high‐impact environments.
Robust, Hermetic Construction
316L stainless-steel body with welded, PTFE-insulated cable and IP67 sealing withstands moisture, dust, and corrosive atmospheres.
High Temperature Range
Operates down to –40 °C and up to +125 °C, suitable for both cold‐climate installations and hot process areas.
Dual-Mounting Options
Standard stud mount for permanent installations or adhesive pad for rapid, non-invasive sensor placement.
Freight Estimation(Part Of The Area)VOGI
|
Destination |
Freight |
|
Middle East |
$35 |
|
Southeast Asia |
$15 |
|
South Asia |
$45 |
|
South Africa |
$37 |
|
Europe and USA |
$24 |
|
Russia |
$42 |
Applications
VOGI
Industrial Gearbox Health Surveillance
Detects gear-mesh frequency sidebands in heavy-duty gearboxes (mining, marine, petrochemical), enabling predictive maintenance scheduling to avoid unplanned downtime.
Mobile Equipment Vibration Safety
Installed on pumps, motors or conveyors in mining haul trucks or cranes; 4–20 mA loop into vehicle PLC alerts operators to dangerous vibration levels, preventing structural fatigue.
Remote Offshore Platforms
Hermetic sealing and corrosion-resistant housing suit offshore oil-and-gas platforms, where CE310 sensors feed platform control systems without additional conditioning infrastructure.