VIBRO-METER
0102030405
Vibro-Meter CI185 VMD-185-020-AT-CA-M001 Vibration Acceleration sensor
ordering informationVOGI
Output Current 4-20mA DC proportional to RMS velocity (mm/s)
Velocity Range See table below
Frequency Response 2 Hz to 1 kHz ±10 %
Dynamic Range 50g peak
Mounted Resonance 5 kHz min
Isolation Base isolated
Operating Temp Range -30 to 90 ºC
Temperature Sensitivity 0.08 %/ºC
Transverse Sensitivity Less than 5%
Supply Voltage 12-32 Volts DC (4-20 mA) Loop powered
Standard Cable length 5 meters armoured PTFE for AT and EX versions
Maximum Cable length 1000 meter, for EX version see ATX009
Mating Connector 2 pin MS for CT version
Case Material Stainless steel
Weight 150 gms (nominal)
Sealing IP67
Mounting Torque 8 Nm
Features
VOGI
Triaxial Measurement: Vibro-Meter CI185 VMD-185-020-AT-CA-M001 can measure triaxial vibration parameters such that speed, frequency, and amplitude of vibrations receive a complete analysis.
Integrated Temperature Sensor: It gives a simultaneous measurement of temperature, signifying thermal conditions at the time of vibration monitoring.
Wireless Data Transmission: Vibro-Meter CI185 VMD-185-020-AT-CA-M001 transmits to the site accurate recorded data using the LoRaWAN wireless communication protocol, thereby providing access and remote monitoring via the Move Solutions IoT platform.
Local Data Storage: It can record as much as 2000 acquisitions locally, with each being made up of 1024 data points. Raw data can be downloaded via USB to a PC.
High Precision: With its advanced technology and high-quality components, Vibro-Meter CI185 VMD-185-020-AT-CA-M001 provides highly accurate and consistent measurements, assuring reliable data for analysis and decision-making.
Non-Contact Measurement: The non-contact measurement feature of Vibration CI185 enables it to perform measurements without any physical contact with the object.
Freight Estimation(Part Of The Area)VOGI
|
Destination |
Freight |
|
Middle East |
$35 |
|
Southeast Asia |
$15 |
|
South Asia |
$45 |
|
South Africa |
$37 |
|
Europe and USA |
$24 |
|
Russia |
$42 |
Applications
VOGI
Automotive Industry: For the monitoring of vehicle component vibrations such as engines, transmissions, and chassis, and for diagnosing faults, improving performance, and ensuring the safe and reliable operation of the vehicles.
Aerospace Sector: Vibro-Meter CI185 VMD-185-020-AT-CA-M001 is crucial for the structural health monitoring of aircraft, satellites, and other aerospace structures, facilitating the early detection of damages that could have occurred due to vibrations during flight.
Robotics: Vibro-Meter CI185 VMD-185-020-AT-CA-M001 helps evaluate the vibrations of robotic arms and any moving components to provide better precision, control, and overall performance, as well as preventing unnecessary wear and failure of components.
Structural Monitoring: To monitor the vibrations of buildings, bridges, dams, and other large structures, providing information about structural health and for planning maintenance or ensuring the occupant's safety.
Industrial Machinery: Vibro-Meter CI185 VMD-185-020-AT-CA-M001 can monitor condition of various industrial machines, including turbines, pumps, compressors, and motors, enabling predictive maintenance and reducing the downtime caused by unexpected malfunctions.