Vibro-Meter CPUM 200-595-100-032 CPU Card

KEY FEATURES AND BENEFITS :

• From the Vibro-Meter® product line 

• VM600 CPUM/IOCN rack controller and communications interface card pair with support for Modbus RTU/TCP and PROFINET, and a front-panel display 

• “One-Shot” configuration management of protection cards (MPC4 and AMC8) in a VM600 rack using an Ethernet or RS-232 serial connection to a computer running the VM600 MPSx software 

• Front-panel display for visualisation of monitored outputs and alarm limits from protection cards 

• Front-panel alarm reset (AR) button 

• VM600 MPS rack (CPUM) security 

• Industry standard fieldbus communications interfaces: Modbus RTU/TCP and PROFINET 

• Two Ethernet connections and up to three serial connections (RS-232 / RS-422 / RS-485) can run simultaneously 

• Communications redundancy with multiple fieldbuses: Ethernet and/or serial

High-performance processing capability:

Multi-core processor architecture, Vibro-Meter CPUM 200-595-100-032 supports real-time signal acquisition and parallel computing, suitable for continuous monitoring of high-precision vibration, temperature, pressure and other parameters1 (refer to the characteristics of the same series CPUM module).

Sampling rate ≥10kHz, can capture high-frequency mechanical vibration signals, combined with FFT analysis to achieve early warning of faults such as bearing wear and shaft misalignment.

Industrial reliability:

Wide temperature operating range (-40℃~+70℃), protection level IP40, adapt to extreme industrial environments (such as dust and humid scenes), redundant design supports dual-machine hot standby, active-standby switching time ≤50ms, to ensure uninterrupted monitoring of key equipment.

Flexible scalability:

Modular slot design, Vibro-Meter CPUM 200-595-100-032 supports expansion of input/output modules (such as XIO16T, XMV16, etc.), and adapts to multiple types of sensor signals (such as accelerometers, displacement sensors). Vibro-Meter CPUM 200-595-100-032 compatible with multiple communication protocols (Modbus TCP/IP, OPC UA, etc.), easy to integrate with PLC and DCS systems.