VIBRO-METER
Vibro-Meter IQS900 204-900-000-011-A1-B21-C1-H05-I0 signal conditioner
ordering informationVOGI
KEY FEATURES AND BENEFITS :
• From the vibro-meter ® product line
• Non-contact measurement system based on eddy-current principle
• Ex certified versions for use in hazardous areas (potentially explosive atmospheres)
• Conforms to API 670 recommendations
• 5 and 10 m systems
• Temperature-compensated design
• Voltage or current output with protection against short circuits
• Frequency response: DC to 20 kHz (−3 dB)
• Measurement range: 12 mm
• Temperature range: −40 to +180 °C
Applications:
VOGI
Applications:
Power Industry
Gas Turbine/Steam Turbine: Vibro-Meter IQS900 204-900-000-011-A1-B21-C1-H05-I0Monitor bearing vibration, speed, phase, etc. to prevent mechanical failure.
Generator/Compressor: Real-time monitoring of vibration exceeding the standard or imbalance problems.
Wind Power Equipment: Health monitoring of key components such as gearbox and main shaft.
Oil and Gas
Centrifugal Pump/Reciprocating Compressor: Detect mechanical seal failure or bearing wear.
Pipeline Transportation System: Monitor vibration anomalies to avoid leakage risks.
Industrial Manufacturing
Large Motor/Pump Group: Vibro-Meter IQS900 204-900-000-011-A1-B21-C1-H05-I0Predictive maintenance to reduce unplanned downtime.
Rolling Mill/Gearbox: Vibration protection of high-load equipment.
Aerospace
Aircraft Engine Test Bench: Vibration data collection and analysis during the test phase.
Ship and Maritime
Ship propulsion system: monitor propeller shaft vibration and misalignment problems.
Freight Estimation(Part Of The Area)VOGI
|
Destination |
Freight |
|
Middle East |
$35 |
|
Southeast Asia |
$15 |
|
South Asia |
$45 |
|
South Africa |
$37 |
|
Europe and USA |
$24 |
|
Russia |
$42 |
Related supporting products:
VOGI
Vibro-Meter IQS900 204-900-000-011-A1-B21-C1-H05-I0 Usually as the core of the system, it needs to work with other hardware and software:
Sensor type
Acceleration sensor: used for high-frequency vibration signal acquisition.
Eddy current sensor: measure shaft displacement or speed.
Temperature sensor: assist in monitoring bearing or winding temperature.
Signal processing and transmission
Preamplifier: signal conditioning and amplification.
Data acquisition card: multi-channel synchronous acquisition.
Control system integration
PLC/DCS interface module: communicate with factory control system.
Relay output module: trigger alarm or shutdown signal.
Software tool
VM600 Configuration Tool: configure IQS900 parameters and alarm thresholds.
Third-party analysis software: used for spectrum analysis and fault diagnosis.
Redundancy and Expansion
Dual Channel Configuration: Vibro-Meter IQS900 204-900-000-011-A1-B21-C1-H05-I0 High reliability is achieved through the redundancy option in the A1-B21-C1-H05-I0.