Vibro-Meter EA902-011 913-902-000-011 A1-E4000-F0-G0 Extension Cable
Technical ParametersVOGI
Part Number & Configuration
913-902-000-011
A1: EA902 series extension cable
E4000: 4.0 m total length
F0: Standard PTFE-insulated inner dielectric
G0: Basic foil shield (100% coverage)
EA902-011 913-902-000-011 Cable Construction
Inner Conductor: 0.9 mm silver-plated copper, PTFE insulation
Shield: Aluminum/polyester foil, 100% coverage
Outer Jacket: Oil-resistant PVC, Ø 7 mm
EA902-011 913-902-000-011 Electrical Characteristics
Characteristic Impedance: 50 Ω ± 5%
Capacitance: ≤ 120 pF/m
Voltage Rating: 300 V DC
Leakage Current: < 10 µA
EA902-011 913-902-000-011 Connector Interfaces
Probe End: M12 5-pin male, keyed
Conditioner End: M12 5-pin female, keyed
EA902-011 913-902-000-011 Environmental & Mechanical
Bend Radius: ≥ 10× cable Ø (~ 70 mm)
Temperature: –40 °C to +125 °C
Ingress Protection: IP67 when mated
Chemical Resistance: Oils and solvents per IEC 60068-2-45
Tensile Strength: ≥ 50 N
Key Features
VOGI
Mid-Range Reach (4 m)
Ideal for installations where probes are close to, but not directly adjacent to, conditioning or rack modules.
Full Foil Shield
100% foil wrap provides basic EMI/RFI protection with minimal added bulk.
High-Grade PTFE Dielectric
Ensures stable electrical properties and flexibility across a wide temperature range.
Robust M12 Quick-Disconnect
Simplifies field installation and maintenance—no special tools, IP67 sealing.
Oil-Resistant Jacket
Durable PVC outer sheath resists industrial oils, grease, and abrasion.
Freight Estimation(Part Of The Area)VOGI
Destination |
Freight |
Middle East |
$42 |
Southeast Asia |
$15 |
South Asia |
$55 |
South Africa |
$47 |
Europe and USA |
$27 |
Russia |
$50 |
Applications
VOGI
Compressor Seal-Clearance Control
Routes probes monitoring 0–1 mm oil-seal clearances on gas compressors back to DCS-controlled conditioners, triggering surge-prevention interlocks.
Hydroelectric Gate Position Feedback
Links probes in flood-control gate mechanisms to control-room racks 4 m away, providing real-time small-movement feedback for process automation.
OEM Test-Rig Deployments
Bundled in machinery-test trailers, the 4 m extension allows probes to be mounted on rotating equipment while conditioners sit in shielded consoles.