VIBRO-METER
Vibro-Meter EA902-011 913-902-000-011 A1-E9000-F0-G0 Extension Cable
Technical ParametersVOGI
Part Number & Configuration
913-902-000-011 with suffix A1-E9000-F0-G0
A1: EA902 series extension cable
E9000: 9.0 m total length
F0: Standard PTFE-insulated inner dielectric
G0: Basic foil shield (no braid)
EA902-011 913-902-000-011 Cable Construction
Inner Conductor: 0.9 mm silver-plated copper, PTFE insulation
Shield: Aluminum/polyester foil, 100 % coverage
Outer Jacket: Oil-resistant PVC, 7 mm Ø
EA902-011 913-902-000-011 Electrical Characteristics
Impedance: 50 Ω ± 5 %
Capacitance: ≤ 120 pF/m
Voltage Rating: 300 V DC
Leakage Current: < 10 µA
EA902-011 913-902-000-011 Connector Interfaces
Probe End: M12 5-pin male
Conditioner End: M12 5-pin female, keyed
Environmental & Mechanical
Bend Radius: ≥ 10× cable Ø (~ 70 mm)
Operating Temperature: –40 °C to +125 °C
Ingress Protection: IP67 when mated
Chemical Resistance: Oils and solvents per IEC 60068-2-45
Tensile Strength: ≥ 50 N
Key Features
VOGI
Long-Reach Extension (9 m)
Enables routing from probes to remote racks or conditioners without field splices.
Full Foil Shield
100 % coverage foil shield ensures basic EMI rejection for clean signal transfer.
PTFE Dielectric
Maintains consistent electrical properties and flexibility across temperature extremes.
M12 Quick-Connect
Simplifies installation and service—no special tools required.
Compact, Oil-Resistant Jacket
PVC outer sheath withstands industrial oils and abrasion in machine-room environments.
Freight Estimation(Part Of The Area)VOGI
|
Destination |
Freight |
|
Middle East |
$42 |
|
Southeast Asia |
$15 |
|
South Asia |
$55 |
|
South Africa |
$47 |
|
Europe and USA |
$27 |
|
Russia |
$50 |
Applications
VOGI
Hydroelectric Pit to Control Room
Runs probes from turbine pit vaults to dry-area VM600 racks 9 m away, preserving full probe bandwidth for both slow deflection and vibration monitoring.
Compressor Skid Remote Cabinets
Extends TQ902 probes on offshore compressor gearboxes to sheltered instrument cabinets, reducing EMI pickup and protecting electronics from salt spray.
OEM Condition-Monitoring Kits
Bundled with bespoke skid or machine-tool packages, this 9 m extension provides convenient probe-to-rack wiring for end-user plug-and-play commissioning.