VIBRO-METER
Vibro-Meter IQS900 204-900-000-011-A1-B21-C1-H10-I0 signal conditioner
ordering informationVOGI
KEY FEATURES AND BENEFITS :
• From the vibro-meter ® product line
• Non-contact measurement system based on eddy-current principle
• Ex certified versions for use in hazardous areas (potentially explosive atmospheres)
• Conforms to API 670 recommendations
• 5 and 10 m systems
• Temperature-compensated design
• Voltage or current output with protection against short circuits
• Frequency response: DC to 20 kHz (−3 dB)
• Measurement range: 12 mm
• Temperature range: −40 to +180 °C
Applications:
VOGI
Applications:
Energy industry
Gas turbine/steam turbine: Real-time monitoring of rotor vibration, eccentricity, differential expansion, etc. to prevent mechanical failure.
Wind turbine: Vibro-Meter IQS900 204-900-000-011-A1-B21-C1-H10-I0Monitor the vibration of gearbox, main shaft and generator to optimize maintenance cycle.
Hydropower station: Condition monitoring of hydro-generator set.
Oil and gas
Compressor/pump set: Monitor the vibration of reciprocating or centrifugal equipment to avoid leakage or bearing failure.
Pipeline transportation system: Detect potential risks caused by mechanical abnormalities.
Industrial manufacturing
Large motor/generator: Vibro-Meter IQS900 204-900-000-011-A1-B21-C1-H10-I0Prevent bearing wear or rotor imbalance problems.
Papermaking/metallurgical equipment: Vibration protection of high-speed rollers and rolling mills.
Aerospace
Vibration monitoring of aircraft engine test benches.
Freight Estimation(Part Of The Area)VOGI
|
Destination |
Freight |
|
Middle East |
$35 |
|
Southeast Asia |
$15 |
|
South Asia |
$45 |
|
South Africa |
$37 |
|
Europe and USA |
$24 |
|
Russia |
$42 |
Related supporting products:
VOGI
Sensors
Acceleration sensors: such as Vibro-Meter 2000 series.
Eddy current sensors: used for displacement measurement.
Monitoring systems
VM600 series: integrated with IQS900 module, providing multi-channel data acquisition and analysis.
CSI 6500 (Emerson): monitoring solutions compatible with third-party systems.
Software and interfaces
Iris software: configure IQS900 parameters and data analysis.
Modbus/Profibus interface module: realize communication with PLC/DCS.
Auxiliary equipment
Signal conditioner: such as 204-300-000-001, used to enhance sensor signals.
Explosion-proof housing: Vibro-Meter IQS900 204-900-000-011-A1-B21-C1-H10-I0 is suitable for hazardous environments such as oil and gas.