VIBRO-METER
Vibro-Meter IQS900 204-900-000-011-A1-B31-C1-H10-I0 signal conditioner
ordering informationVOGI
KEY FEATURES AND BENEFITS :
• From the vibro-meter ® product line
• Non-contact measurement system based on eddy-current principle
• Ex certified versions for use in hazardous areas (potentially explosive atmospheres)
• Conforms to API 670 recommendations
• 5 and 10 m systems
• Temperature-compensated design
• Voltage or current output with protection against short circuits
• Frequency response: DC to 20 kHz (−3 dB)
• Measurement range: 12 mm
• Temperature range: −40 to +180 °C
Product information:
VOGI
Product information:
Vibro-Meter IQS900 204-900-000-011-A1-B31-C1-H10-I0 signal conditioner is designed for operation with vibro-meter TQ proximity sensors, that is, non-contact proximity sensors / measurement chains based on the eddy-current principle.
Note: The IQS900 is compatible with different TQ9xx (and TQ4xx sensors) and replaces all previous versions of the IQS45x signal conditioner (PNR 244-45x-000-xxx).
Vibro-Meter IQS900 204-900-000-011-A1-B31-C1-H10-I0 signal conditioner provides a dynamic output signal – current (−15.5 to −20.5 mA) or voltage (−1.6 V to −17.6 V) – suitable for advanced condition monitoring applications that require spectral analysis, for example, machinery analytics and diagnostics. In comparison, the IQS910 signal conditioner provides a slowly-varying output signal (4 to 20 mA current-loop) suitable for machinery protection and/or basic condition monitoring applications based on cost-effective trending of overall levels.
Vibro-Meter IQS900 204-900-000-011-A1-B31-C1-H10-I0 is a configurable and versatile device that generates, converts and processes (high-frequency modulator/demodulator) signals from a TQ proximity sensor into a current or voltage output signal suitable for transmission to the monitoring system. For example, it is factory-configurable for sensitivity and measurement range (transfer function), system length, and optional diagnostic circuitry (with variants defined by ordering option code).
Vibro-Meter IQS900 204-900-000-011-A1-B31-C1-H10-I0 is designed and built for long-term use, and is available in standard versions and in Ex versions certified for use in potentially explosive atmospheres (hazardous areas). Similarly, it is also available with or without diagnostics: versions with diagnostics automatically and remotely indicate the health/status of the measurement chain so you always know when measurements can be trusted. The diagnostics (SIL 2 “by design”) bring enhanced reliability and significant risk reduction, making the IQS900 suitable for use in safety-related applications (functional safety contexts).
Freight Estimation(Part Of The Area)VOGI
|
Destination |
Freight |
|
Middle East |
$35 |
|
Southeast Asia |
$15 |
|
South Asia |
$45 |
|
South Africa |
$37 |
|
Europe and USA |
$24 |
|
Russia |
$42 |
Features:
VOGI
Signal conditioning for TQ proximity sensors.
Shaft relative vibration and gap/position measurement for machinery protection and/or advanced condition monitoring.
Very wide frequency range (DC to 20000 Hz), with configurable sensitivity and measurement range.
Current output for signal transmission over long distances or voltage output for signal transmission over medium distances.
Certified for use in potentially explosive atmospheres (hazardous areas).
Suitable for use in functional safety contexts: SIL 2 in accordance with IEC 61508 and Cat 1 PL c in accordance with ISO 13849.
Fully compliant with API 670 5th edition.
“Raw” output and “Test” input signals for in-situ test support.