Vibro-Meter RPS6U 200-582-300-013 Rack Power Supply
Technical ParametersVOGI
Part Number: 200-582-300-013
Input Voltage: Two independent 18–36 V DC sources
Output Voltage: 24 V DC ± 1 % to the backplane bus
Output Current: Up to 10 A per module (20 A total when two modules share load)
Efficiency: ≥ 90 % at full load
Protections:
Reverse-polarity protection on each input
Inrush-current limiting
Auto-resetting overcurrent/short-circuit protection
Thermal fold-back under over-temperature
Status Monitoring:
Front-panel LEDs for each input (OK/fault) and overall output (Power-Good)
Rear “Power-Good” dry-contact output for external alarms or DCS integration
Form Factor: VM600-compatible 6 U card (160 × 160 × 120 mm), hot-swap capable
Environmental:
Operating: –25 °C to +65 °C
Storage: –40 °C to +85 °C
Humidity: up to 95 % RH, non-condensing
Shock & vibration per IEC 60068-2 series
EMC/EMI: Compliant with industrial immunity (EN 61000-6-2) and emissions (EN 61000-6-4)
Key Features
VOGI
Automatic Dual-Input Redundancy
Two DC inputs share load and automatically isolate any failed source—ensuring uninterrupted 24 V supply.
Advanced Protection Circuitry
Inrush limiting and self-resetting overcurrent/thermal protection safeguard both the module and downstream electronics.
Comprehensive Status Feedback
Local LEDs plus remote dry-contact closure enable immediate fault indication and seamless SCADA/DCS integration.
Hot-Swap Serviceability
Modules can be replaced under power (when paired with a second module) to minimize rack downtime.
Seamless Backplane Integration
Direct plug-in to the VM600 backplane eliminates external cabling, simplifying installation and maintenance.
Rugged Industrial Design
Built for heavy-industry environments—wide temperature range, high humidity tolerance, and immunity to shock, vibration, and electrical noise.
Freight Estimation(Part Of The Area)VOGI
Destination |
Freight |
Middle East |
$67 |
Southeast Asia |
$20 |
South Asia |
$90 |
South Africa |
$72 |
Europe and USA |
$41 |
Russia |
$81 |
Applications
VOGI
Turbine Protection Racks (Power Plants)
Dual-fed from battery backup and plant DC, RPS6U modules power MPC4 trip cards and CMC16 trend modules—maintaining protection logic even if one supply fails.
Offshore Compressor Skids
Installed in explosion-proof skid enclosures with dual DC feeds (rig bus and UPS), ensuring continuous power to vibration and position monitoring cards.
Refinery Distributed Monitoring
Deployed across multiple VM600 racks in a refinery; redundant power prevents single-point failures from silencing critical pump and compressor alarms.