Vibro-Meter TQ402 111-402-000-013 A1-B1-C060-D000-E100-F0-G000-H10 Proximity Sensor
Technical ParametersVOGI
Measuring Range & Sensitivity
0–2.5 mm linear span
4 mV/µm (voltage mode) or 1.25 µA/µm (current mode)
Frequency & Linearity
DC to 20 kHz (–3 dB)
≤ ± 1 % non-linearity over full span (with matched conditioner)
≤ 5 % interchangeability between identical probes
Electrical & Cable
Powered by –20 V to –32 V DC (≈ 13 mA) from conditioner
Output impedance ~ 500 Ω (voltage) / drive ≤ 800 Ω (current)
No integral cable; accepts up to 5 m user-supplied PTFE-insulated, shielded coax (per H05 spec)
Mechanical & Environmental
Body length: 40 mm; diameter: 12 mm; aluminum housing
Hardened-steel, flush-mount tip
Mounting thread: M6 × 0.5
Operating: –25 °C to +140 °C; Storage: –40 °C to +150 °C
Shock: 50 g, 2 ms; Vibration: ≤ 25 g, 5 Hz–5 kHz
Pressure: up to 100 bar at probe face
Ingress: IP 65 at tip; IP 40 at cable entry
Certifications
ATEX Zone 1 (Ex ia IIC T6)
CSA Class I Div 1 Groups A B C D
IEC 60529 / CE / CENELEC
Key Features
VOGI
Extended Body Length
60 mm probe body for recessed or deep-mount positions, ensuring tip access to the target surface.
Field-Configurable Cable
No factory-fitted cable; installers specify PTFE-insulated, shielded coax length and connector type on-site.
Lightweight Aluminum Housing
Minimizes probe mass to avoid influencing delicate shaft dynamics or bearing loads.
Wideband, High-Resolution Measurement
Captures both slow thermal drift and high-frequency vibration (up to 20 kHz) without external filters, with micron-level resolution.
Robust Environmental Ratings
Designed for extreme shock, vibration, temperature, and pressure; IP 65 protection at the sensing tip.
Hazard-Zone Compatibility
Intrinsically safe approvals (with appropriate conditioners) allow direct installation in classified areas.
Freight Estimation(Part Of The Area)VOGI
Destination |
Freight |
Middle East |
$42 |
Southeast Asia |
$15 |
South Asia |
$55 |
South Africa |
$47 |
Europe and USA |
$27 |
Russia |
$50 |
Applications
VOGI
Deep-Mounted Turbine Bearing Monitoring
The 60 mm body reaches recessed journal bearings; user-supplied cable runs back to a remote VM600 rack. Continuous eccentricity and vibration data prevent misalignment and rubs.
Custom-Built Gearbox Installations
Aluminum housing and configurable cabling allow integration into bespoke gearbox assemblies where space and mass constraints are critical.
Hydroelectric Draft Tube Gate Shaft Positioning
Mounted on draft-tube shafts; custom-length cable routes through the dam structure to conditioners in a dry control gallery, monitoring slow deflection and resonance.