VIBRO-METER
0102030405
Vibro-Meter TQ912 111-912-000-011 A1-B6-E5000-F0-G0-H05 proximity sensor
Technical ParametersVOGI
Model & Part Number
TQ912 111-912-000-011
Suffix:
A1: TQ912 series eddy-current probe
B6: 0–6 mm linear measuring range
E5000: 5 000 mm integral coaxial cable
F0: Standard stainless-steel housing
G0: No braid over shield (basic shield)
H05: PTFE insulation
TQ912 111-912-000-011 Measuring Range & Sensitivity
Span: 0–6 mm (linear over full range)
Sensitivity: 2.5 mV/µm (voltage mode)
Frequency Response & Linearity
Bandwidth: DC to 20 kHz (–3 dB)
Linearity: ≤ ± 1 % full-scale
TQ912 111-912-000-011 Electrical & Drive
Excitation: –20 to –32 V DC via conditioner (≈ 13 mA draw)
Output Impedance: ≈ 500 Ω
TQ912 111-912-000-011 Mechanical & Environmental
Body Length: 42 mm; Ø 12 mm stainless-steel (alloy 1.7225)
Tip: Flush-mounted hardened steel
Mounting Thread: M6 × 0.5
Cable: 5 m integral PTFE-insulated coax (no braid)
Operating Temp: –25 °C to +140 °C
Storage Temp: –40 °C to +150 °C
Shock: 50 g, 2 ms; Vibration: ≤ 25 g, 5 Hz–5 kHz
Pressure Rating: Up to 100 bar at probe face
Ingress: IP 65 at tip; IP 40 at cable junction
TQ912 111-912-000-011 Certifications
ATEX Zone 1 (Ex ia IIC T6)
CSA Class I Div 1 Groups A B C D
IEC 60529 / CE / CENELEC
Key Features
VOGI
Extended Clearance Range
The 0–6 mm span accommodates larger gaps (e.g., slow shafts, long seals), while maintaining linear accuracy.
Long-Reach Cable
5 m PTFE cable enables routing to remote conditioners without field splices; ideal where rack access is distant.
High-Frequency Response
DC–20 kHz bandwidth captures both slow centerline shifts and high-frequency vibration components.
Robust Stainless-Steel Construction
Withstands harsh industrial environments, high shock/vibration, and pressures up to 100 bar.
Simple Integration
Standard M6 × 0.5 thread and integral cable plug directly into IQS450/ IQS900 modules or VM600 backplane extensions.
Hazard-Zone Approved
Certified for use in explosive atmospheres upon pairing with appropriate, certified conditioners
Freight Estimation(Part Of The Area)VOGI
|
Destination |
Freight |
|
Middle East |
$42 |
|
Southeast Asia |
$15 |
|
South Asia |
$55 |
|
South Africa |
$47 |
|
Europe and USA |
$27 |
|
Russia |
$50 |
Applications
VOGI
Large-Shaft Hydro-Pump Clearance
Monitors eccentricity on low-speed, high-clearance pump shafts (e.g., Kaplan runners) where 6 mm span is required; cable routes to a dry-area VM600 rack.
Variable-Gap Industrial Fans
Tracks blade-tip clearance in fans where thermal growth or belt-tension shifts can open to several millimeters; early detection prevents mechanical interference.
Cavitation-Sensitive Pump Monitoring
Installed on seal housings of centrifugal pumps handling corrosive fluids; larger range allows for slight misalignment without false alarms.